XFP CAST 1-2 Loop Panel

The CAST XFP 1 loop addressable panel is a powerful and cost-effective fire detection and alarm system designed by C-TEC. It is certified to EN54 parts 2, 4, and 13, and is available with C-TEC’s own CAST digital fire alarm system protocol.

• Powerful 40V 450mA loop driver allows the connection of up to 255 CAST devices
• High-speed data transmission and two soft addressing options (automatic via the panel or manual via a handheld programmer)
• Suitable for small to medium-sized stand-alone applications and larger, more sophisticated installations

• Approvals/certifications : LPCB certified to EN54-2 & 4 and Kiwa Telefication certified to EN54-13
• Protocol/compatibility : C-TEC CAST
• Mains supply : 230V 50/60Hz
• Mains rated current : 350mA maximum
• Internal power supply : 27Vdc nominal
• Total output current limited to : 1.4A @ 230Vac (Imax.A 210mA; Imin. 40mA)
• Quiescent current : 50mA (loop unloaded)
• Max battery size and type : 2 x 12V 3.2Ah VRLA connected in series
• No. of loop drivers : 1
• Max. loop output current : 450mA (40V max)
• Max. loop length : 1KM
• Max. addressable devices per loop : 255
• No. of conventional sounder circuits : 2 (Max. length per circuit is 500m)
• EOL resistor value : 6800Ω 5% Tol. 0/25W (blue, grey, red, gold)
• Max. sounder output current : 400mA
• Auxiliary relays : 3 x Programmable Relays (programmable from C&Es). 1 x Fault Relay (active when no faults are
  present). Volt free single pole changeover. Max. switch current 1A; Max. switch voltage 30Vdc
• Other outputs : 24V Aux. Power (19.5V min, 28V max). Protected by a resettable fuse. Max. current 100mA
• Auxiliary inputs : 2 x Programmable Inputs (programmable from C&Es). Connect to 0V to trigger, Max. input voltage 27V
  (non-latching)
• PC connection : PC connection via RS232 molex connector (supplied in XFP507 upload/download software kit); No printer
  connection available
• Indicators : 2 line x 40 character backlit display; 16 Zonal LEDs, General Fire; Energised; Pre-Alarm; Remote Output
  Activated; Remote Output Disabled; Accessed; Disablement; Test; Silenced; General Fault; Syst
• Connections : Fixed, largest acceptable conductor size 1mm2
• Expansion connections :2-wire RS485 non-redundant network/repeater connection available via optional XFP761 network card.
  Max. 8 mains per network or 8 repeaters per non-networked main. Limit 1KM (main panel network) or
• Product dimensions (mm) :380 W x 235 H x D 96mm (hole required for flush mounting = 367 W x 220 H x 75 D mm. No bezel
  required)
• Construction & finish : Plastic lid and base; RAL7035 textured
• IP Rating : IP30
• Weight : 1.8kg (without batteries)
• Operating conditions/temperature : -5ºC to +40ºC. Max relative humidity: 95%

• Datasheet (Adobe PDF)