Advanced Go Single Loop Fire Panel

The new Go series is an evolution for non-networked single-loop fire alarm systems. Its innovative design includes several improvements and upgrades to critical safety features, while retaining all the benefits and user-friendly operation of an Advanced fire alarm control panel.

A new ergonomic layout of control panel is combined with our high resolution, high contrast, graphical LCD display. The tactile keypad allows simple select-and-click programming for faster engineer configuration and simple end-user operation.

Two performance options are available with a different maximum number of configurable addresses, allowing greater flexibility for site-specific installations: Go and Go+.

Functional improvements include integral zonal LEDs which enable instant identification of alarm locations, and ensure compliance with BS5839 without the cost of a separate LED zone card.

The new PCB integrates both control panel and peripherals on the same board and incorporates the latest high-speed micro- processor technology, for 9 times faster operation than MxPro 4.

Powerful cause-and-effect programming and enhanced trace diagnostics make the panel suitable for a wide range of site applications, from small to medium systems.

All Go series panels are fully programmable on site via the control panel display or with our updated, easy-to-use PC Configuration Tool.

Digital-ready FACP

The future-proof Go series is digital-ready for connection with our intuitive AdvancedLive Cloud app.

AdvancedLive provides remote visualisation and management of a fire system via instant communication with enabled devices, and reduction of false alarm evacuation occurrence and fire safety risks.

• Multiprotocol support, Apollo (Discovery, XP95), Hochiki (ESP) & Argus (VEGA).
• Graphical LCD user interface, LED indicators & push buttons.
• Installer-friendly Auto-learn, Loop detection and On-board scope facility.
• 500 fire + 5000 general event logging, with advanced diagnostic precision to aid installation & fault-finding.
• Integral 15 Zone LEDs ensures compliance with BS5839, with 35 additional software indication zones.
• Uses a new Configuration Tool with Office365 appearance with better graphics and easier functions for programming.
• Two on-board Sounder outputs, three on-board Relay outputs.
• Optional 3 monitored input/outputs for Fire/Fault routing (with P-Bus adaptor & routing card) for full EN54 compliance when connected to an Alarm Receiving Centre.
• Dedicated USB Type B port for direct PC connection.
• Ethernet port for Cloud connection via AdvancedLive, to provide remote notification and panel management.
• Innovative ‘no hinge’ removable door and hangable chassis for easier installation.
• Employing an identical monitoring feature as the Mx-5000 series, the Go series meets the requirements of EN54-13 (2005) Clauses 5.3.4.1 and 5.3.4.2 (partial open & short circuits) for optimal fire system performance and complete peace of mind.

• Datasheet (Adobe PDF)
• Brochure (Adobe PDF)

• Protocols : Apollo (XP95, Discovery), Hochiki (ESP), Argus (VEGA)
• Number of Loops : 1
• Loop Current : 500mA max
• Number of Fire Zones : 50 max
• Sounder Outputs : 2 x 1A Programmable (1A total)
• Relay Outputs (Programmable) : 3 x 1A 30VAC/DC (max) to 10mA 5V (min)
• Auxiliary Output : 24V DC, 100mA (With GOP-001 Fitted)
• Display : LCD White backlit 240 x 64 Graphical LCD
• Programmable Inputs : 1 x Key Switch, 1 x monitored
• USB : USB type B interface for PC connection
• Network : None
• Ethernet : 10-Base-T, 100-Base-T
• Event Log : 5000 Events with Diagnostics + 500 Fire Events
• Enclosure : Steel IP30 RAL7035
• Dimensions H x W x D : 345 x 345 x 87mm
• Weight (excluding batteries) : 4Kg
• Temperature Range : -5°C to 40°C
• Humidity (RH) : 95% max
• Cable Entries : 14 x 20mm knockouts at top
• AC Supply : 220-240V, 50 – 60 Hz, 1.0A max
• Safety : EN62368-1, Class 1, Pollution Degree 2, Overvoltage Category II
• Battery Capacity : 24V 4Ah Internal (min), 24V 7Ah Internal (max)
• Charging Current : 0.35A Temp Compensated
• Deep Discharge Cut-off : 19.5V
• Power Supply : On-board 24V DC, 1.5A High Efficiency Off-Line Switched Mode
• Output Voltage : 18.0V – 28.0V
• Ripple (Vpkpk) : Up to 1.0V
• Max Battery Ohms : 1.8Ω ± 0.1 Ω
• Imax(a), Imax(b) : 1.15A, 1.5A