Hochiki ESP Addressable Yellow Manual Call Point with SCI

The Hochiki HCP-E(SCI) is an advanced analogue manual call point designed for use in fire alarm systems. It features an integral short-circuit isolator and is fully compatible with Hochiki’s ESP analogue addressable protocol. The unit includes a bi-coloured LED for status indication, which can be configured for pulsing or non-pulsing communication polling. It is designed for both surface and flush mounting, with a non-frangible element fitted as standard to conform to EN54 standards. The HCP-E(SCI) is LPCB approved and offers a high level of reliability and safety for various applications.

• Non-frangible element fitted as standard (conforms to EN54)
• Addressed with TCH-B200 Hand Held Programmer
• Surface or flush mounting (requires SR Mounting Box for surface)
• LPCB Approved to EN54-11
• SIL Level 2 approved and ‘SMOKE VENT’ label printed variant available

• Ordering Codes : HCP-E/Y(SCI)
• Backbox Ordering Code : SR MOUNTING BOX (required for surface fixing)
• Ingress Protection Rating : IP24
• Colour / Case Material : Red / Modified Polyphenylene Oxide
• Operating Voltage : 17-41VDC
• Low Power Mode : 180 µA (max), 100 µA (typ)
• Quiescent Current : 350 µA (max), 250 µA (typ)
• Alarm Current : 10.0 mA (max), 5 mA (typ)
• Resistance In Positive : 100 mΩ when closed (max), 100 kΩ when open (min)
• Short Circuit Threshold (typ.) : 430 Ω
• Transmission Method : Digital Communication Using ESP
• Operating Temperature Range : -10°C to +50°C
• Storage Temperature Range : -30°C to +70°C
• Max Humidity : 95%RH Non-condensing (at 40°C)
• Weight (g) / Dimensions (mm) : 110 / W 89 x H 93 x D 27.5 (With Surface Mount Back Box 161 / W 89 x H 93 x D 59.5)

• Datasheet (Adobe PDF)